- Meguiar's Natural Shine Vinyl & Rubber Protectant Spray - 16 oz.
- Menzerna Medium Cut Polish 2400 - 32 oz.
- Meguiar's DA Microfiber Cutting Discs, DMC5 - 5 inch (2 pack)
- Cam Spray 1000 PSI Cold Water Electric Command Cart Pressure Washer with Mechanical Thermal Relief, C1000E
- Meguiar's Ultimate Wash & Wax Anywhere - 26 oz.
- Griot's Garage Interior Cleaner - 1 gal.
- 303 Marine & Recreation Fabric Guard - 1 gal.
- Adam's Swirl Killer Mini 12mm LT Polisher
- P&S All Purpose Cleaner - 1 gal.
- Gtechniq Panel Wipe - 5 liter
- Meguiar's Black Chrome Protectant Wipes (25 wipes)
Directions:
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard™. Spray until evenly wet, overlapping sprayed areas. NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 6-12 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard™ will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE:75-100 sq. ft. (7-9.3 m²) per 16 fl. oz. (473 ml) on lightweight fabrics; 40-75 sq. ft. (3.7-7 m²) on heavier fabrics depending on material and application method.