You have no items to compare.
Directions:
After sanding to desired level of grit, use 3D Wool Pad and apply enough 3D AAT RUBBING COMPOUND to work a 2’ x 2’ area.
Adjust polisher speed to 1200-2000 rpms and slowly buff a 2’ x 2’ area using back and forth overlapping passes.
Once the sanding scratches are removed switch to 3D Yellow Foam Pad and repeat steps 1 & 2.
Remove compound with microfiber towel before moving on to another panel and follow-up with 3D AAT® FINISHING POLISH to remove any slight remaining holograms.