MTM Hydro Magnum28 Foam Cannon Kit ith Stand Up Bottle

MTM Hydro's Italian-made Magnum28 foam cannon pressure washer attachment kit features the newest foam cannon and spray gun technology on the market. The stylish and robust SGS28 spray gun with integrated stainless live swivel is paired with stainless fittings and the PF22 foam cannon pressure washer attachment to give you a premium Italian Foam Kit that is unmatched by any other. Complete with the new stand up bottle, this kit is unrivaled. Whether you are foaming down your car on the weekend or you are a professional contract cleaner washing multiple vehicles per day, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill with your desired ratio of chemical and you are up and running. The snub style Magnum28 Kit allows you to fit in tight spaces when cleaning and eliminates reaching 40" away to adjust your cannon settings.

Included Items:

• Italian Brass Foam Cannon body
• Italian Calibrated 32 oz Grey PF22 Stand Up Bottle
• 1/4" x 9" tube for drawing chemical
• 3.5 Orifice (1.25mm) installed in the Foamer Body
• 3.0 Orifice (1.1mm) included with the kit
• 2 Replacement filters
• SGS 28 Spray Gun with Integrated Stainless Live Swivel
• 1/4" Male Stainless Coupler - Gun Outlet
• 1/4" QC Stainless Steel Plug - Cannon Inlet
• 3/8" QC Stainless Steel Plug - Gun inlet
• 3/8" M22 (14mm) Plug - Optional Gun inlet fitting
• Teflon Tape for installation - 6 Wraps per fitting
• Manual with maintenance instructions and exploded view

Specifications:

Foam Cannon

Min. 1,100 PSI - Max. 5,000 PSI

Min. 1.4 GPM - Max. 5.3 GPM

Max. 140°F

 
Note: The full spectrum of ratings is not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- For example, 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of the bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice. See below for additional orifice sizes and replacement items available for purchase.

SGS 28 Spray Gun
    •    Max - 3,000 PSI
    •    Max - 4 GPM
    •    Max - 320° F