Hydrosilex Recharge - 16 oz.

Foam Cannon Application

1. Once the wash final rinse process is complete, fill the foam cannon dispenser bottle with Hydrosilex Recharge
2. Apply to Hydrosilex Recharge utilizing the foam cannon on all exterior surfaces of the vehicle. use approximately 250 ml per vehicle.
3. Rinse treated surfaces with water thoroughly until water runs clear. 
4. Dry vehicle properly with a clean microfiber towel

NOTE* Always use clean towels, microfiber towels are recommended.

Wet Application

1. During the wash process, rinse the vehicle.
2. Spray Hydrosilex Recharge onto all wet exterior surfaces
3. Rinse treated surfaces immediately before Recharge dries on surface until water runs clear.
4. Dry vehicle properly with a microfiber towel

NOTE* Always use clean towels, microfiber towels are recommended.

Dry Application

1. Spray Hydrosilex Recharge onto clean vehicle surfaces
2. Follow up immediately and dry with a clean microfiber towel
3. Buff with an additional clean microfiber towel if necessary.

NOTE*Always use clean towels. Microfiber towels are recommended.