Your shopping cart is empty.
Innovative paintwork finishing polish provides an initial deep cut, then diminishes to a gloss, resulting in a hologram-free paint surface. Desired results can be achieved in a single step. Silicone-free formula is an excellent choice for paint/body shops. The special nano-abrasives enable effective scratch removal with optimum shine and without inducing holograms or buff marks on the paintwork.
- Cut: 4/6
- Gloss: 6/6
Directions for Use:
Shake bottle/tube before use.
Deep scratches or paintwork damage should first be wet sanded with abrasive paper P2000, or finer.
Product to be worked in with a rotational speed regulated polishing machine.
Apply a little of the product directly to the sanded spot.
Polish the area at the lowest rotational speed (ca. 800 rpm) with an orange PolishingPad (493 000) for 10 sec. Tilt the machine a little bit.
Afterwards, increase to medium rotational speed and allow the machine to run, now exerting only moderate pressure.
Guide it swiftly over the surface to avoid heat developing beneath the polishing pad.
Remove polish residue with a microfiber cloth.
To achieve a hologram-free finish on darker paintwork, finish polishing with a foam pad may be necessary.
|Units Per Case (Bulk/Case Orders)||6|
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.