Your shopping cart is empty.
SHAKE WELL BEFORE USE. For glossy paint finishes only (NOT for use flat, matte or satin finishes).
- Apply product directly onto a soft foam applicator pad, DA or DA Power System foam polishing pad or 100%cotton terry towel. Using moderate pressure, work the product into the paint making 2-4 overlapping passes. If applying by HAND, use a tight, circular pattern. Heavy water spots may require re-application of product and more passes.
- Work one section at a time, removing the product as you go with a premium towel like Meguiar's Supreme Shine microfiber or 100% cotton terry towel. Do not allow product to dry - if it does, re-apply product over the dried portions and immediately remove.
- Turn to a clean portion of the towel for final wipe off. Protect the newly polished finish with Meguiar's Ultimate Wax.
Review this Product
You're reviewing: Meguiar's Water Spot Remover - 16 oz.
|Review by Paul|
I had a few difficult water spots on the hood of my black Audi. Meguiar's took care of the spots where other products failed. I used a white lake country pad on a DA. Some spots came off in 2 to 4 passes, others required 2 or 3 more applications. It would have probably gone faster if I used an orange pad, but I wanted to be less aggressive on the clear coat. One thing to note is that if you have dark paint then you will need to follow up with a good polish to clean up the light swirls this product will leave on your finish. I expected to follow up with polish and I don't see this as a failure of the product. I was skeptical in buying a product only costing $10, but this proves that you don't always have to spend a lot of $ for good results.
|1 Item(s)||Show per page|