Your shopping cart is empty.
- Apply sufficient material to boat surface to work a 2' x 2' area. Prior to buffing, spread material with buffing pad to reduce slinging.
- Using polisher (suggested 1500-2500 RPM) begin to buff with some initial pressure.
- Reduce pressure as compound starts to dry, allowing material to polish surface.
- Repeat only if necessary to remove any remaining sanding marks or swirls. After compounding: if further surface refinement is desired us 3M Marine Finesse-It II Finishing Material (PN 05928) with a 3M Marine Superbuff (PN 05705) or 3M Hookit Polishing Pad (PN 05711) on a slow speed polisher. To provide protection, apply a coat of 3M Marine Protective Liquid Wax (PN 09034) or Scotchgard Marine Liquid Wax (PN 09061).