3M Trizact Hookit Foam Sanding Discs, 3000 grit, 02087 - 3 inch (box of 15)$47.99
List Price: $62.99
3M Trizact Hookit Sanding Discs, 1000 grit, 02091 - 3 inch (box of 15)$45.99
List Price: $59.99
3M Perfect-It Black Foam Polishing Pad, 05726, 3 inch (2 pack)$13.99
List Price: $17.99
3M Perfect-It Foam Buffing Pad, 05759 - 3 inch (2 pack)$13.99
List Price: $17.99
3M Hookit Soft Interface Pad, 05771 - 3 inch$5.99
List Price: $7.99
3M Clean Sanding Disc Pad Kit for Orbital/DA Polishers, 20427 - 3 inch$25.99
List Price: $32.99
3M Purple Clean Sanding Discs, 800 grit, 30260 - 3 inch (box of 50)$28.99
List Price: $37.99
3M Purple Clean Sanding Discs, 500 grit, 30272 - 3 inch (box of 50)$28.99
List Price: $37.99
3M Perfect-It Rubbing Compound, 39060 - 16 oz.$23.99
List Price: $31.99
3M Perfect-It Machine Polish, 39061 - 16 oz.$22.99
List Price: $29.99
3M Purple Clean Sanding Discs, 320 grit, 30275 - 3 inch (box of 50)$28.99
List Price: $37.99
Add the 3M Headlight Lens Restoration System to your revenue stream of car care services.
The 3M Headlight Lens Restoration Kit (3M 02516) is a fast and easy way to restore the clarity back to headlight lenses that have become dull or cloudy over time. It was designed with the professional in mind to maximize productivity and performance. In many cases, this kit can be paid for in as little as 10 jobs. Use the 3MHeadlight Lens Restoration System to increase your profitability and customer satisfaction.
3M 02516 Headlight Lens Restoration System Components includes:
- 1 - 3M Random Orbital Sander, PN 28353, Pistol Grip, 3 inch, 1/8 inch orbit
- 1 - 3M Buffer, PN 28354, Pistol Grip, 3 inch
- 1 - 3M Clean Sanding Disc Pad Kit, PN 20427, 3 inch x 1/2 inch x 5/16 inch
- 2 - 3M Hookit Soft Interface Pad, PN 05771, 3 inch
- 1 - 3M Purple Clean Sanding Hookit Discs, PN 30272, 3 inch, P500, 50 discs per box
- 1 - 3M Purple Clean Sanding Hookit Discs, PN 30260, 3 inch, P800, 50 discs per box
- 1 - 3M Trizact Hookit Blending Discs, PN 02091, 3 inch, P1000, 15 discs per box
- 1 - 3M Trizact Hookit Foam Discs, PN 02087, 3 inch, P3000, 15 discs per box
- 1 - 3M Perfect-It Foam Buffing Pads, 05759, 3 inch, 2 pads per bag
- 1 - 3M Perfect-It Foam Polishing Pads, 05726, 3 inch, 2 pads per bag
- 1 - 3M Perfect-It Rubbing Compound, 39060, 16 oz
- 1 - 3M Perfect-It Maching Polish, 39061, 16 oz
- 1 - 3M Promotional Display
- 1 - 3M Directions for Use
- 1 - 3M Tool Bag
|Sanding Steps – 3" DA Sander||Polishing Steps – 3" Polisher|
Frequently Asked Questions for the Headlight Restoration System
How long will a refinished lens remain clear?
This will be dependent on many factors that vary greatly including; environment, altitude, lens
material, lens design, surface coating, indoor or outdoor storage, and exposure to harsh car wash
chemicals. We’ve seen headlights begin to oxidize as early as 10 months up to 2 or more years
depending on the environment. This is a difficult question to answer accurately.
Does a refinished lens yellow sooner than an OEM or new aftermarket replacement lens?
Yes, the refinished lenses will likely yellow sooner than an equivalent OEM or aftermarket lens.
However, in order to restore clarity to the lens, the degraded UV coating must be removed. The
UV resistance will vary on refinished lenses based on environment, lens composition, and many
other factors. Therefore it is difficult to estimate how much sooner a lens will yellow when
compared to an OEM or aftermarket replacement lens.
Does 3M offer a UV coating with the kit?
No, we have found coatings can have several limitations and negative effects on the headlight
lenses. In many cases the coating does not bond well to the lens and begins peeling or chipping
off after a only few months. The coatings can haze the lens or mask the final clarity of the lens.
Many of the coating will actually degrade under UV faster than the polycarbonate lens material
How long will this process take?
On an average it will take about 15-20 minutes per headlight. Headlights that are larger or that
are harder to sand will require more time and can take from 30-40 minutes per lens. Smaller
lenses may only take about 10 minutes per lens. The first sanding step that removes the
yellowing will normally be the most time consuming step.
Can a headlight lens be refinished more than once?
Yes, a lens can be refinished several times using the 3M Refinishing System. Most lenses are
made of polycarbonate material that is 1/8” to a ¼” thick. We are only removing a small
fraction, less than 1/32” in most cases, from the overall lens thickness.
What plastic are the headlights made of?
Most lenses are made of polycarbonate material, some are polyacrylic. Both can be restored
with this process. Do not use this system on glass or glass lenses.
Do I have to worry about the 500 grit abrasive being too aggressive during the first sanding step?
No, the plastic headlights are thick and much more forgiving than clear coat paint. As
with any sanding procedure, keep the DA sander moving so excessive heat is not generated in
one area on the surface of the lens. Excessive heat can result in smearing which will require
more sanding and can be difficult to remove. It is important to sand with the first step until the
entire degraded layer is completely removed.
Can customers use coarser grade abrasives like P320 or P400?
Yes, however they must step out the headlight in a normal abrasive sequence like:
P320 > P500 > P800 > P1000…..etc. The customer must order the coarser grades separately
from the kit. There are some headlight lenses that have a very hard surface layer that is tough to
sand efficiently with 500 grit abrasive. It is more time efficient on these lenses to start with either 320 or 400 grit
Do the headlights have a coating on them?
Yes, many of them have a thin UV coating or a thermal cap layer. It’s important to remove the
yellowed or oxidized UV coating or surface layer during the P500 sanding step. If this degraded
layer is not removed, the overall results will be limited.
Why do the headlight lenses become hazed, yellowed, or pitted?
Hazing, yellowing, and pitting is the result of several factors including sunlight/UV exposure,
impact with sand and road debris, climate/environmental conditions, as well as age, composition,
and design of the headlight lens. The yellowing you see is either a degraded surface of
polycarbonate or a degraded UV coating or thermal cap layer. In any case, it needs to be
removed to restore clarity to the lens.
Will the 3M Headlight Restoration System work on all Headlight Lens defects?
No. Damage or defects on the backside of the lens or moisture inside the headlight assembly can
not be repaired with the Headlight Restoration Kit. Yellowing and defects on the outside surface
of the headlight lens can be refurbished. Do not use on glass headlights.
Can I use this system on glass?
No, do not use this system on glass. It’s extremely difficult to get sand scratches out of glass.
Are 3M Perfect-It Rubbing Compound and 3M Perfect-It Machine Polish body shop
Yes, these products and the entire Hookit (New as of 2/2010) Headlight kit is body shop safe and
contains no silicones. The Hookit II (original) kit contains Plastic Polish which does contain
silicone and should not be used in a paint booth environment.
Can I use this system to remove scratches from newer headlight lenses?
Yes, this system will remove scratches from newer lenses. However, in order to have consistent
clarity across the lens, the entire surface will need to be sanded, removing the UV resistant
coating. This does compromise the UV resistance of the headlight lens as a refinished lens will
likely yellow sooner than the original lens. This information must be considered when removing
scratches from an otherwise new condition lens.
How do I know when I am done with the first sanding step (P500 grit)?
This is the most important step, if the defects/yellowing are not completely removed in this step,
it will show in the final appearance of the headlight lens. Before moving to the next sanding step
(800 grit), the lens should have a white, evenly sanded surface that appears to look “frosted”. If
any portion of the lens looks clear or glossy, continue sanding with the 500 grit before moving to
the next sanding step (800 grit).
When should I change to a new abrasive disc?
When the abrasive disc is no longer removing material or making dust it is time to change to a
new disc. Also, if the disc becomes loaded, clogged with residual, or ripped it is time to change
to a new disc. Sanding with a disc that is no longer working will generate excessive heat on the
headlight lens and can cause smearing on the surface of the lens that can be difficult to remove.
How much water is needed with the Trizact abrasive discs?
A mist of water from a spray bottle on the lens surface and on the abrasive disc should be
sufficient. If the surface becomes dry while sanding, apply a mist of water to the lens surface
and/or the abrasive disc.
Does extra sanding with the Trizact P3000 abrasive disc improve lens clarity?
Yes, extra sanding using both the Trizact P1000 and P3000 grit abrasive discs will further refine
sand scratches. This reduces the depth of the sand scratches and makes the polishing step faster
which in turn will improve the final clarity of the lens.
How much Rubbing Compound is needed on each lens?
Apply and add Rubbing Compound in dime-sized amounts as needed to the purple compounding
pad until the lens clarity has reached the desired level. This will minimize the amount of sling
which reduces waste and clean-up. The amount of Rubbing Compound needed to complete each
lens will vary from one lens to the next.
How much Machine Polish is needed on each lens?
Apply and add Machine Polish in dime-sized amounts as needed to the black foam pad until the
lens clarity has reached the desired level. This will minimize the amount of sling which reduces
waste and clean-up. You will use less Machine Polish per lens compared to the amount of
Rubbing Compound per lens.
What should I do if I see sand scratches remaining in the lens when I am finished with the
Machine Polish step?
Return to the Trizact P3000 sanding step and repeat the process from there. It is necessary to
return to the Trizact P3000 step to remove any sand scratches that were not removed the first
time through the process.
What can I do to maintain the lens clarity over time?
Periodically repeat the Rubbing Compound and/or Machine Polish steps of the process to
maintain lens clarity. The frequency needed for this will vary significantly depending on many
factors including UV exposure level and the specific headlight lens.
Can I refinish taillights using this system?
Yes, this system will work very well for this application. Taillight lenses don’t typically see the
abuse of headlight lenses. You can start with the Trizact P3000 grit for most taillight lenses. If
there are deeper scratches or heavy oxidation, you can start with coarser grades if needed.
What is the proper psi required to run the 3M Random Orbit Sander and 3M Buffer that
comes with the kit?
Both tools are designed to operate at 90 psi at the tool.
What size air compressor is needed to supply air to these tools?
90 psi is needed at the tool. The specific size of the air compressor needed depends upon several
factors. Generally, an air compressor that can deliver 22-24 CFM @ 90 psi is needed for
continuous operation of these tools. This typically will be a compressor of 7.5 HP or larger. A
smaller compressor will work but will likely have interrupted or limited/reduced supply of
compressed air to the tool. Performance of the air compressor will vary with tank size, actual
CFM output from the compressor, HP of the motor, number of tools being used at one time, and
Can Nitrogen be used to operate these tools?
Yes, nitrogen can be used but it will need to be regulated down from very high pressure to 90
psi. Nitrogen is very dry, adding oil to the tools as recommended (3-5 drops per shift, at the end
of the shift) is necessary when using Nitrogen.
|Availability||Online + In Store|
|Units Per Case (Bulk/Case Orders)||1|
You may also be interested in
List Price: $239.99
List Price: $239.99
List Price: $3.99
|Review by The Perfectionist|
I run a detail shop and have had customers asking about Headlight Restoration for years. I never thought of getting into it until @ SEMA Expo last year, I was able to catch 3M demonstrating there Headlight Restoration Kit. Not only was it easy, but QUICK! ( depending on lens condition - about 10-15 min a lens) The results are shocking for one would think new lights have been installed. I have since implemented this service to my shop and have had much success. I'm the only guy ( on my block at least! ) doing it. Add it before they do!